Free Estimates. Clear Expectations.
Estimates are always free. You’ll receive a detailed written estimate or quote before work starts. Any proposed changes to the agreed scope or price will be discussed with you before proceeding.
HOMES & SMALL MULTIFAMILY PROPERTIES
Electrical services for your property.
Remodel wiring, panels and service equipment, troubleshooting, lighting, EV charger installation, and specialty projects for homes and small multifamily properties. Start with a conversation and a free written estimate.
Plan the electrical work while your renovation is taking shape. Pops Power Solutions LLC provides wiring for kitchen and bathroom updates, basement finishes, additions, and outbuildings, including lighting layouts, switches, outlets, ceiling fans, and smoke/CO detector installation or replacement.
Kitchen and bathroom remodel wiring
Wiring for appliance locations, counter and vanity outlets, switches, and fixtures as part of your renovation. Layouts are planned around the space and the work being completed.
Recessed lighting and fixture rough-in
Cable runs, ceiling openings, fixture boxes, and controls for a lighting layout that fits the room. Rough-in work happens before final fixtures and finishes are installed.
Basements, additions, garages, and workshops
Electrical design and wiring for basement finishes, home additions, and attached or detached garages and workshops, including furnace power runs and disconnect raceways.
Ceiling fan installation and replacement
Install a new ceiling fan or replace an existing one as part of a remodel or room update, with attention to the mounting, wiring, and controls serving the fan.
Smoke and carbon monoxide detectors
Install or replace smoke and carbon monoxide detectors, including planned updates during a remodel. We review the existing setup and discuss the devices and connections needed for your project.
Understand the electrical equipment serving your property before planning a change. Pops Power Solutions LLC handles panel replacements and upgrades, subpanel work, exterior power upgrades and service-equipment relocation, and circuit organization for homes and small multifamily properties.
Panel replacements and subpanel work
Review your existing panel and plan replacements, upgrades, or subpanels around the property’s electrical needs and the proposed work.
Exterior service upgrades and relocation
Exterior service work, power upgrades, and relocation of service equipment, planned around your property and project needs.
Circuit connections and identification
Panel wiring, circuit routing, and directory labeling to help identify what each circuit serves and make future service easier to understand.
Small multifamily service equipment
Discuss panel and service-equipment needs for properties with multiple dwelling units, including the equipment and metering arrangement serving the building.
Electrical system inspection and maintenance
Diagnostic checks for electrical hazards, aging wiring, and work that may need correction. These service assessments do not replace required municipal inspections.
A dead outlet, recurring breaker trip, or unreliable light deserves a careful diagnosis. Pops Power Solutions LLC traces the issue, explains the findings, and provides a written estimate for the recommended work. Repairs and device updates can also be coordinated with a remodel.
Breakers, circuits, and wiring faults
Identify and repair the causes of tripping breakers, dead outlets, flickering lights, and wiring problems.
Switches, outlets, and GFCI updates
Replace worn devices and make practical outlet and switch updates for the way the room is used, including GFCI protection where applicable.
Lighting and fixture updates
Replace light fixtures and address the boxes, wiring, and controls serving them. We can discuss the right approach for existing rooms and spaces being renovated.
Make your property work for the way you live. Pops Power Solutions LLC installs home EV chargers and provides low-voltage and media wiring, smart-control integration, and outdoor electrical work. We review the existing setup and plan the connections around your equipment and project.
Home EV charger installation
Plan a convenient charging location and the wiring needed for your home EV charger. We review the existing electrical setup and discuss circuit and panel needs before providing a written estimate.
Low-voltage, network, and media wiring
Structured low-voltage setups, network and HDMI distribution, and media routing that account for where equipment is located and how the space is used.
Smart controls and connected devices
Wiring and integration for automated control devices, with attention to the existing electrical setup and compatibility with the planned equipment.
Outdoor and seasonal electrical work
Power and lighting for outdoor spaces, using equipment and installation methods appropriate for the location and upper Midwest weather.
A CLOSER LOOK AT THE WORK
Real projects.
The details behind them.
Remodel wiring, panels, and service equipment.
A look at work in progress and the systems serving a property.
Kitchen remodel rough-in
Switch, outlet and lighting wiring while the walls and ceiling are open. Work in progress.
Explore Related Services
Inside the electrical panel
A closer look at circuit connections and wire routing inside a panel. Panel cover removed for work.
Explore Related Services
Switch and fixture wiring
Boxes, cable runs and conduit during rough-in, before wall finishes and devices are installed.
Explore Related Services
Small multifamily service equipment
A service-equipment layout with multiple meters and disconnects for a multifamily property.
Explore Related Services
Planning for recessed lighting
Ceiling cutouts and cable runs show the lighting layout during a kitchen renovation. Work in progress.
Explore Related Services
Circuit identification and organization
A breaker panel and its circuit directory, part of understanding which circuits serve a property.
Explore Related Services
Exterior service and power upgrades
Exterior service work and power upgrades, including relocation of service equipment for a residential property.
Explore Related Services
Service equipment relocation
A closer look at the meter enclosure, disconnect equipment, and conduit connections involved in the service upgrade and relocation.
Explore Related ServicesCLEAR FROM THE START
Good work begins
with clear expectations.
Written estimates, respectful service, and
workmanship we stand behind.
Respect for Your Time and Home
Expect a scheduled arrival window, direct communication if delays occur, and a clean, respectful job site.
Safety and Code Compliance
Installations and repairs follow applicable Minnesota electrical codes and local municipal requirements.
Payment Options
We accept Visa, Mastercard, Discover, American Express, ACH or bank transfers through secure invoice links, and cash upon completion of service. Card payments can be processed online or on-site. Payment details are collected through the payment provider, not through the estimate request form.
1-Year Workmanship Warranty
Installation and remodel projects include a one-year warranty on our labor and craftsmanship. If an issue results from our installation within 12 months of completion, we’ll correct it at no additional charge.
Manufacturer Warranty Support
We honor applicable manufacturer warranties and help you with warranty support for installed fixtures, panels, and devices, subject to the manufacturer’s terms.
A Final Walk-Through
At the end of the project, we’ll walk through the completed work with you and address your questions before final sign-off.
Are estimates free?
Yes. Estimates are always free, and you’ll receive a written estimate or quote before work begins.
When are services available?
Services are available Monday–Friday, 7 a.m.–5 p.m. Central Time. Contact us to discuss your project and arrange an appointment.
Does selecting a date book an appointment?
No. The date on the request form is your preference. We’ll contact you to confirm availability and arrange an appointment.
What electrical work do you offer?
We work on residential homes and small multifamily properties. Our four service groups cover remodels and renovations, electrical service upgrades and panel work, troubleshooting and repairs, and specialty and outdoor projects.
Do you install home EV chargers?
Yes. We install home EV chargers and review the existing electrical setup, charging location, and circuit or panel work needed for your project. Include the charger details in your free estimate request.
Do you work on small multifamily properties?
Yes. In addition to homes, we work on small multifamily properties. Tell us about the building, its existing electrical setup, and the work you have in mind so we can discuss the right scope.
What areas do you serve?
We serve St. Paul, Isanti, Cambridge, Blaine, Anoka, Plymouth, Osseo, Maple Grove, Brooklyn Park, New Hope, Crystal, Minneapolis, Minnetonka, Long Lake, Bloomington, and surrounding communities.
How can I pay?
We accept Visa, Mastercard, Discover, American Express, ACH or bank transfers through secure invoice links, and cash upon completion of service. Card payments can be processed online or on-site. Payment details are collected through the payment provider, not through the estimate request form.
Is there a workmanship warranty?
Installation and remodel projects include a one-year warranty on our labor and craftsmanship. If an issue results from our installation within 12 months of completion, we’ll correct it at no additional charge. We honor applicable manufacturer warranties and help you with warranty support for installed fixtures, panels, and devices, subject to the manufacturer’s terms.
How soon can my project start?
Start dates depend on the scope of work and current availability. Share your project details and an optional preferred weekday in your estimate request. We’ll discuss timing with you before confirming an appointment.
YOUR HOME. OUR CARE.
Have a project in mind?
Tell us what you have in mind. We’ll help you take the next step with a free written estimate.
Request an EstimateCall (763) 234-5040Monday–Friday · 7 a.m.–5 p.m. CT